YATALO

Picture Name

400-624-8818

--Service hotline——

Company Profile

Electricity accompanies the heat tape in the roof gutter melting snow in a wide range of use

Electricity accompanies the heat tape in the roof gutter melting snow in a wide range of use

In winter, when the snow flies, the white and flawless snow scene makes you forget about it. Although the snow scene is beautiful, whenever the wind and snow pass, the roof of the house will be piled up with a thick layer of snow and ice, and the snow on the roof will be very difficult to melt in the winter. Even during the day, the melted snow will form ice at night, which will eventually cause the roof gutters and drains to become clogged with snow and ice. The accumulation of snow and ice on the roof may exceed the design load of the roof, resulting in roof collapse, damage to drains, or overflow of melted snow and water into the gutters, which can form ice slush at the eaves, posing a hazard to pedestrians or objects underneath the eaves.

10

2022

/

01

Comparison of electric accompanied by tropical gutter snow melting and ice melting system and traditional engineering

Comparison of electric accompanied by tropical gutter snow melting and ice melting system and traditional engineering

The electric heating gutter ice melting system has simple construction and short construction period.

28

2022

/

07

With electric heat tape easy to solve the cold areas of the gas pipeline heat accompaniment and insulation problems

With electric heat tape easy to solve the cold areas of the gas pipeline heat accompaniment and insulation problems

Now a lot of places basically with gas, gas through the pipeline transport fast, convenient, but by the terrain, house building structure and other conditions of the impact of part of the courtyard gas pipeline can not be buried, and the northern region of the city gas mainly to artificial gas, liquefied petroleum gas, liquefied petroleum gas mixed with air and other wet gas is mainly in the winter, courtyard gas pipeline laying, by the impact of the ambient temperature of the wet gas Condensation and icing, will hinder the transport of pipeline, to solve the problem of wet gas condensation and icing, it is necessary to do the overhead gas pipeline with heat and thermal insulation treatment.

12

2021

/

11

Self-limiting temperature electric heat tape main use and application scenes

Self-limiting temperature electric heat tape main use and application scenes

The electric accompanies the tropical belt to have the self-regulating power and the constant power two forms, each form has the various specifications model; Usually according to the temperature interval, the composition structure, the rated voltage, the main use and so on divides into the different classifications. 　　The main use of electric accompanies the tropical belt is as a kind of heat compensation accompanies the heat element, is widely used in various industries, such as liquid, gas, solid material pipeline and tank heat compensation, as well as instruments and meters, mechanical equipment frostproof heat preservation and so on. 　　The main application scene of self-limiting temperature electric accompanying heat tape is generally for fire sprinkler pipe, water supply and drainage pipe anti-freezing and heat preservation, petroleum pipeline and storage tank anti-freezing and anticoagulation, chemical process temperature maintenance, roof or road surface snow melting and ice melting, and building heating, and so on. 　　Involved in civil, industrial, commercial and other major fields, is currently the mainstream of anti-freezing insulation, temperature maintenance. The electric accompanies the tropical belt in the country after nearly twenty years of development, not only the technical performance has been comprehensively improved, and extends out such as accompanies the heat sampling tube, accompanies the heat preservation box and so on a series of products. Its thermal efficiency is remarkable, and energy saving and environmental protection, the use is more and more extensive; Presented the trend of replacing hot water and steam and other traditional accompanying heat.

15

2023

/

02

Self-limiting temperature electric accompanies the tropical strip in the pipeline antifreeze heat preservation in the actual application.

Self-limiting temperature electric accompanies the tropical strip in the pipeline antifreeze heat preservation in the actual application.

When winter comes, as the temperature gradually decreases, many devices are prone to freezing. Because of the freezing point of water pipes, when the ambient temperature is below the freezing point, water pipes are prone to freezing, resulting in clogged pipes. The situation is particularly serious when it comes to low winter temperatures. The way to get around this problem is to insulate against freezing. If just use the pipeline external insulation, it is also difficult to achieve the effect of anti-freezing. Therefore, the comprehensive actual situation, electric heat tape is the more ideal choice of heat preservation.

15

2023

/

02

Self-limiting temperature electric accompanying tropical composition structure and features

Self-limiting temperature electric accompanying tropical composition structure and features

Self-limiting temperature accompanying tropical for the core belt and insulation composition of the basic structure, but also for the core belt, insulation, shielding layer, sheath layer composed of multi-layer structure.

15

2023

/

02

Self-limiting temperature electric accompanying tropical classification and working principle

Self-limiting temperature electric accompanying tropical classification and working principle

(1) According to the length of each heat tracing instrument pipeline and the medium to maintain the temperature, etc., to determine the type of electric heat tape, and calculate the length of electric heat tape, select the appropriate installation. 　　(2) the electric heat tape quality inspection, including: check the electric heat tape whether there are cracks and mechanical damage, etc.; check the electric heat tape waterproof performance. In the process of use, should also be required to do regular insulation checks. 　　(3) Instrumentation piping installation, test pressure should not be blocked, no leakage, no further modification, pipe wall rust removal and brush on the anti-rust primer. Instrumentation piping installation should take into account the convenience of construction of electric heat tape, do not close to the walls, steel frame and process piping, across the platform when the reserved hole should be larger. 　　(4) Laying electric heat tape generally from the upper end of the instrument piping. Differential pressure pipeline installation, as far as possible, the two pressure pipelines laid close to each other, in order to unify the use of pressure pipeline insulation, and can save insulation materials. In the installation of electric heat tape, if the accompanied heat medium temperature is low, close to the pressure point of a section of pipeline is easy to freeze, should pay attention to strengthen the accompanied heat and heat preservation. 　　(5) electric heat tape wrapped in the pipe wall, should be parallel to each other spiral, according to a certain pitch uniform winding. The surface of the tape is in good contact with the pipe wall, but the tape should not be pulled too tight, especially at the elbow, it should be relaxed. In the whole winding process, the electric heat tape itself do not overlap and cross (self-control temperature electric heat tape can cross, overlap), can not appear twisting phenomenon. 　　(6) for the maintenance of the part of the possible demolition, electric heat tape should not be wrapped around the top, can be along the pipeline on both sides with alkali glass cloth tape tied. When overhauling, first partially remove the electric heat tape, and then remove the other parts to avoid damage. 　　(7) electric heat tape installation and test power supply after normal, and then blackout for insulation and waterproof layer construction. Each pipeline insulation construction should be completed at once, the insulation layer can be used glass wool or cotton and other insulation materials, insulation layer can be made according to the size of the diameter of the pipe and the required temperature of the appropriate thickness, to try to be uniform. Then the waterproof layer construction.

15

2023

/

02

Instrumentation electric heat tracing construction procedures

Instrumentation electric heat tracing construction procedures

(1) According to the length of each heat tracing instrument pipeline and the medium to maintain the temperature, etc., to determine the type of electric heat tape, and calculate the length of electric heat tape, select the appropriate installation. 　　(2) the electric heat tape quality inspection, including: check the electric heat tape whether there are cracks and mechanical damage, etc.; check the electric heat tape waterproof performance. In the process of use, should also be required to do regular insulation checks. 　　(3) Instrumentation piping installation, test pressure should not be blocked, no leakage, no further modification, pipe wall rust removal and brush on the anti-rust primer. Instrumentation piping installation should take into account the convenience of construction of electric heat tape, do not close to the walls, steel frame and process piping, across the platform when the reserved hole should be larger. 　　(4) Laying electric heat tape generally from the upper end of the instrument piping. Differential pressure pipeline installation, as far as possible, the two pressure pipelines laid close to each other, in order to unify the use of pressure pipeline insulation, and can save insulation materials. In the installation of electric heat tape, if the accompanied heat medium temperature is low, close to the pressure point of a section of pipeline is easy to freeze, should pay attention to strengthen the accompanied heat and heat preservation. 　　(5) electric heat tape wrapped in the pipe wall, should be parallel to each other spiral, according to a certain pitch uniform winding. The surface of the tape is in good contact with the pipe wall, but the tape should not be pulled too tight, especially at the elbow, it should be relaxed. In the whole winding process, the electric heat tape itself do not overlap and cross (self-control temperature electric heat tape can cross, overlap), can not appear twisting phenomenon. 　　(6) for the maintenance of the part of the possible demolition, electric heat tape should not be wrapped around the top, can be along the pipeline on both sides with alkali glass cloth tape tied. When overhauling, first partially remove the electric heat tape, and then remove the other parts to avoid damage. 　　(7) electric heat tape installation and test power supply after normal, and then blackout for insulation and waterproof layer construction. Each pipeline insulation construction should be completed at once, the insulation layer can be used glass wool or cotton and other insulation materials, insulation layer can be made according to the size of the diameter of the pipe and the required temperature of the appropriate thickness, to try to be uniform. Then the waterproof layer construction.

15

2023

/

02

< 1 2 3 >

YATALO

national unified service hotline: 400-624-8818
Marketing Hotline: 86-022-87887111/87887222/87887333
Technical hotline: 86-022-23767222
Fax service: 86-022-26799118
Enterprise E-mail: ytl@yatalo.com.cn

Enterprise official website:www.yatalo.com
Marketing Exhibition Center: No. 111, Building 1, Beifangcheng District 2, Miyun Road, Nankai District, Tianjin (Yatailong Office Building)
Production R & D Address: Tianjin Binhai New Area Huayuan Industrial Park Haitai International Industrial Base

YATALO

Micro-Blog

YATALO

Website

YATALO

Service Number

YATALO

Subscription Number

爱采购

1688

Copyright©2023 Tianjin Yatailong Thermal Control Technology Co., Ltd.Business License

YATALO THERMAL CONTROL | SEO Tags