Products
-
Self-limiting electric heating tape
-
Industrial electric blanket/removable flexible protective cover
-
Industrial frequency conversion electromagnetic heating system
-
Specialized accessories for electric trace heating systems
-
Electric insulation and installation of integrated materials
TSDC Series Snow and Ice Sensing Controller
Key words:
Classification:
TSDC Snow and Ice Sensing Controller
Free consultation-Free design-Free delivery-Free guidance
- Description
-
- Commodity name: TSDC Series Snow and Ice Sensing Controller
Tait TSDC Series: The TSDC3 snow and ice detection controller is used to detect rain, snow, ice and temperature parameters in the measured environment and is suitable for roofs, eaves, ice pavements and ramps where snow melting is required. The TSDC3 is installed indoors or outdoors in a distribution box for easy observation and manual operation.Various types of detectors need to be installed in the environment to be measured, such as roads, ramps, roofs, eaves and other environments where snow melting is required.In this way, information about the temperature, rain, snow, water, etc. of the environment to be measured can be transmitted to the snow and ice detection controller.The TSDC3 then analyzes the data and outputs appropriate control signals to melt ice and snow in various environments.
► Ice & Snow Controller Mainframe TSDC3
1、Technical Parameters
Working temperature range:
-20°C+70°C
Auto-trigger temperature sensing range:
1℃+28℃ Auto-trigger temperature sensing range error: ±1°C
Input Voltage:
AC110V~240V
Output Load:
3-way 8A
Appearance size:
160*110*70mm
Quality:
380g
2、Description of Performance Characteristics
The Snow and Ice Detection Controller TSDC3 is used to collect parameters such as temperature and relative humidity of the environment to be measured, and make corresponding control outputs according to the collected parameters. The TSDC3 has 3 independent environmental signal inputs, each of which contains the detection of snow and ice, environmental temperature and humidity.Each of these inputs contains the detection of snow and ice, ambient temperature and humidity, etc., and can make relatively independent control outputs.
Ice and snow detection controller TSDC3 surface with a liquid crystal display window, any independent environment temperature and humidity can be displayed on the window.The temperature and humidity of any individual environment can be displayed on the window, and the parameters can be set and the corresponding outputs can be controlled by the electronic knobs on the main unit.
The Ice Detection Controller TSDC3 can detect and control up to 3 separate groups of area environments.The optional three specialized detectors cover almost all measured environments.The user can use any combination of the three specialized detectors.
The Ice Detection Controller TSDC3 can be installed indoors, or outdoors in a distribution box for easy observation and operation.Pay attention to waterproof.
► Road Detector TSDC3-PD
1、Technical Parameters
Use of ambient temperature range:
-40℃+80℃
Auto-trigger temperature sensing range error: ±1°C
Input Voltage:
DC12V
Appearance size:
φ60*H30mm Quality:
560g
Protection Grade IP68
2、Description of performance characteristics
The pavement detector TSDC3-PD is a sensing device that transmits the ambient temperature and relative humidity of the measured pavement via a signal line to the snow and ice detection controller TSDC3.Installation requires immersed fixed in concrete or asphalt pavement, the sensor detection surface is required to be parallel to the road surface, not higher or lower into the road surface.To maintain the basic cleanliness of the road surface, not excessive accumulation of sediment.
The length of the road detector signal cable is 5 meters, because of the special environment, you need to connect the road detector signal cable to the signal adapter box.Then extend to the host.When wiring, please install it strictly according to the wire color marking, it should be easy to check and maintain, and all the wires need to be protected by external casing.
► Ice and snow detector TSDC3-SD
1、Technical Parameters
Working temperature range:
-40℃+80℃
Auto-trigger sensing range display accuracy: ±1°C
Input Voltage:
DC12V
Appearance size:
φ33*L63mm Quality:
220g
Protection Grade IP67
2、 Performance Description
The snow and ice sensor is a sensing device that transmits the temperature and relative humidity of the measured environment to the host of the snow and ice controller through serial communication.
Installation requirements are fixed in a special bracket, the ring-shaped detection surface vertically upward, to be above the ground a certain distance, 0.5 meters can be, in order to avoid being buried in snow.There should not be any blockage around the ice sensor to avoid snow/rain not being sensed when it is snowing due to the ring-shaped detection surface being blocked.
► Ice Detector TSDC3-ID
1、Technical Parameters
Working temperature range:
-40℃+80℃
Auto-trigger sensing range display accuracy: ±1°C
Input Voltage:
DC12V
Appearance Dimensions:
L120*W30*H17mm Quality:
460g
Protection Grade IP68
2、 Performance Description
Ice cream detector TSDC3-ID is a sensing device that detects the melting degree of ice cream in the gutter and eaves, and whether the accumulated water is emptied or not.
The main material of the surface of the Ice Detector TSDC3-ID is resin and alloy material, inside there are ceramic heating module and temperature and humidity detecting device, it can detect the temperature and humidity of the field environment in real time, as well as whether there is still water in the gutter or not, and transmit all the parameters in real time to the Ice Detection Controller.
► Signal adapter box TSDC3-SAB
1、Technical Parameters
Working temperature range:
-40℃+80℃
Appearance dimensions:
L80*W75*H60mm Quality:
320g
Protection Grade IP67
2. Description
Signal adapter box TSDC3 - SAB is used to provide reliable connection and waterproof sealing at the signal line connector when the signal line of the detector is extended.It is an industrial-grade sealed waterproof box with certain characteristics of anti-pressure, anti-aging, dustproof and waterproof.It can be placed outdoors for a long time.Provides a reliable guarantee for signal transmission.
When using the signal adapter box TSDC3 - SAB, be careful to install it on a higher roadbed surface or install it in a distribution box, and be careful not to soak it in puddles.
► Application Scenarios
► Applications
► Applications
Garage entrance/exit ramp snow melting project Roof (factory) gutter snow melting project 
Snow melting electric heat tracing project for automobile parking building ramp Tianjin West Railway Station Gutter Roof Snow Melting 
Beijing Airport Roof Gutter Snow Melting Project Train station roof gutter snow melting project 
车库出入口坡道融雪项目 屋顶（厂房）天沟融雪项目 汽车停车楼坡道融雪电伴热项目 天津西站天沟屋面融雪 北京机场屋面天沟融冰化雪项目 火车站屋顶天沟融雪项目 Key words:- TSDC Series Snow and Ice Sensing Controller
Previous Page
None
Next Page
Product Consulting
Related Products
national unified service hotline: 400-624-8818
Marketing Hotline: 86-022-87887111/87887222/87887333
Technical hotline: 86-022-23767222
Fax service: 86-022-26799118
Enterprise E-mail: ytl@yatalo.com.cn
Enterprise official website:www.yatalo.com
Marketing Exhibition Center: No. 111, Building 1, Beifangcheng District 2, Miyun Road, Nankai District, Tianjin (Yatailong Office Building)
Production R & D Address: Tianjin Binhai New Area Huayuan Industrial Park Haitai International Industrial Base
Micro-Blog
Website
Service Number
Subscription Number