Solution
-
-
Anti-freezing heat tracing system for fire-fighting pipelines
-
Power plant desulphurisation and denitrification accompanying heat insulation system
-
Power plant grey hopper heat tracing and temperature maintenance system
-
Oil and gas pipeline heat tracing and temperature maintenance system
-
Industrial inverter electromagnetic heating application system
-
Long distance heat tracing system for long distance pipelines
-
Chemical raw material pipeline heat tracing and temperature maintenance system
-
Offshore Drilling Platform Pipe Pump Tank Heat Tracing System
-
Industrial pipeline anti-freezing heat tracing and temperature maintenance system
Snow melting and ice melting system on slope pavement
Key words:
Classification:
Snow and ice melting system for ramps
Snow and ice melting system for ramps
Snow and ice melting system for ramps
Thermal control engineers always provide you with a safe, economical, energy-saving, environmentally friendly, stable and intelligent thermal control system overall solution!
- Description
-
- Commodity name: Snow melting and ice melting system on slope pavement
With the improvement of people's living standards, cars have become a very common means of transportation for every household, so parking spaces are very important, and the location of the underground garage is spacious, and it can effectively protect the vehicle, which is very convenient. However, the entrance of the underground garage is mostly a ramp, and in the cold area in winter, there are more rain and snow weather, and the ramp will cause the vehicle to slip or slip if it freezes, resulting in a great safety hazard. Therefore, it is necessary to melt snow and ice on the ramp and ramp.
► Application scenarios
With the improvement of people's living standards, cars have become a very common means of transportation for every household, so parking spaces are very important, and the location of the underground garage is spacious, and it can effectively protect the vehicle, which is very convenient. However, the entrance of the underground garage is mostly a ramp, and in the cold area in winter, there are more rain and snow weather, and the ramp will cause the vehicle to slip or slip if it freezes, resulting in a great safety hazard. Therefore, it is necessary to melt snow and ice on the ramp and ramp.
It is suitable for all kinds of ramps, and can be used for melting snow and ice in parking lot entrances and exits, sidewalk ramps, and overpass up and down ramps.► Snow melting and ice melting system on slope pavement
The main components of the snow melting and ice melting system: intelligent temperature control distribution box, special electric heat trace for snow melting, ice and snow sensor controller, power junction box, terminal junction box, stainless steel cable tie, snow melting special card, etc.
System Advantages:
1. Cost-effective: The electric heat tracing designed and selected by our company has a long service life, low maintenance rate and high heat transfer rate.
The advantages of YATALO self-limiting electric heat tracing: low starting current, low upfront power distribution cost, long service life, low maintenance cost in the later stage, low power consumption for long-term operation, and high heat conversion rate. We pay attention to the quality of each single product and the professional quality of system integration products, so as to achieve the effect of reducing costs and increasing efficiency in the real sense.
2. Safety guarantee: The main performance items of YATELO electric heating product manufacturing standards meet the GB/T19835-2015 standard, and the product materials are made of high-quality materials to ensure that the performance of the electric heat tracing meets the standards, with good thermal stability, low starting current, uniform heating temperature, heating temperature is within the standard range, will not overheat or short circuit lead to heat tracing combustion or burning, long service life, low attenuation of power meter, and high cost of replacement cycle caused by short life.
► How it works
The slope surface snow melting and ice melting system uses the ice and snow sensor controller to monitor the temperature of the environment, rain or snow and the water state of the road surface that is easy to freeze, and can automatically analyze the temperature and snowfall of the on-site environment, and the road snow melting system will start working when the two requirements are met.
Control mode:
Because the formation of ice and snow is not only a matter of temperature, humidity is also one of the influencing conditions, only the temperature and humidity at the same time to reach the conditions of ice and snow formation can ice and snowfall occur, so the system can not use the traditional thermostat, need to use a special ice and snow sensor controller, combined with the actual situation of the project, our company adopts a combination of intelligent control and manual control.
1. Intelligent control: the snow melting sensor and temperature control sensor are set in the control box, and the temperature adjustment can be adjusted according to the size and thickness of the snow, and the surface temperature of the snow melting heat can reach 45 to 65 degrees, and the outdoor temperature requirement can be set to about 5 degrees. At the same time, it is also possible to set the time delay of snow melting. When the temperature is lower than 0°C, the snow melting system is activated, and the active control of the road snow melting system is completed when the snow is stopped or there is no snow on the road or the temperature is higher than 0°C.
2. Manual control: while setting up a special intelligent control system, taking into account the special circumstances, to ensure the use of the system, and at the same time setting up a manual control system, the system is based on the setting of the automatic control system, does not affect the operation of the automatic system, and can be started at any time according to the needs of the user when needed, so as to truly realize the people-oriented function.
Note: Several of these settings make up the entire road snow melting system, with all automatic and manual controls centralized in the control room► Conventional selection
► Technical parameters
Cable model
TXLP-1R
TXLP-2R
Supply voltage
AC220V
AC220V
Rated output power
17W/m、18.5W/m
17W/m、18.5W/m
Maximum maintenance temperature
65℃
65℃
Outside diameter
6.5mm
7.8mm
Cold wire length
2.25m
2.25m
Minimum bending factor
5D
5D
Product features: The advantages of intelligent heating cable: small starting current, low power distribution cost in the early stage, long service life, low maintenance cost in the later stage, low power consumption in long-term operation, and high heat conversion rate.
► Construction and installation
The installation of the road is generally to lay a layer of thermal insulation layer first, lay a reflective layer on the insulation layer, the reflective layer can mainly play the role of heat upward conduction, and then lay a layer of barbed wire, fix the snow melting heat trace on the barbed wire, and finally let the civil construction party cover the concrete filling layer on the snow melting heat tracing.
Precautions: Before the construction of snow melting heat tracing, it should first be confirmed that the reservation and embedding work of cable reserved pipes, thermostat junction boxes, floor temperature sensor pipes, and distribution box line pipes have been completed. Other professional concealed projects in the laying area have been completed, and the site meets the conditions of closed and independent construction (this project should not be cross-constructed with other single projects); If there is a water pipe or line pipe, it should be cut and buried in the ground in advance. Before the installation of the heating cable, the first resistance and insulation test shall be carried out by the on-site professional and technical personnel, and the construction and installation can only be carried out after the test record is made.
The heat trace may harden in winter and is not suitable for installation, so it can be heated by connecting the heat trace in time and should not be installed in the construction environment below -5 °C, because it is difficult for the cable to bend when it is lower than -5 °C, and forced bending will inevitably cause damage to the cable. According to the pre-designed arrangement of the heat tracing, the heat tracing is evenly laid on the metal mesh starting from the end of the power supply according to the wire, and the heating is tied every 250mm.
► Application examples
Key words:- Snow melting and ice melting system on slope pavement
Previous Page
None
Next Page
Product Consulting
Related Products
national unified service hotline: 400-624-8818
Marketing Hotline: 86-022-87887111/87887222/87887333
Technical hotline: 86-022-23767222
Fax service: 86-022-26799118
Enterprise E-mail: ytl@yatalo.com.cn
Enterprise official website:www.yatalo.com
Marketing Exhibition Center: No. 111, Building 1, Beifangcheng District 2, Miyun Road, Nankai District, Tianjin (Yatailong Office Building)
Production R & D Address: Tianjin Binhai New Area Huayuan Industrial Park Haitai International Industrial Base
Micro-Blog
Website
Service Number
Subscription Number