Products
-
Self-limiting electric heating tape
-
Industrial electric blanket/removable flexible protective cover
-
Industrial frequency conversion electromagnetic heating system
-
Specialized accessories for electric trace heating systems
-
Electric insulation and installation of integrated materials
Drain Pipe Frost Heating Line
Key words:
Classification:
Drain Pipe Frost Heating Line
Free consultation-Free design-Free delivery-Free guidance
- Description
-
- Commodity name: Drain Pipe Frost Heating Line
After the chiller has been working for some time, ice will form on the fan's air blades, and the antifreeze hairline will be used to defrost the water so that the melted water can be discharged out of the cold room through the drain pipe.Since the front part of the drain pipe is installed inside the freezer, it is necessary to install a hairline to ensure that the melted water does not freeze in the drain pipe because the environment below 0°C often causes the melted water to freeze and clog the drain pipe.The heaters are installed in the drain pipe to heat the pipe while defrosting so that the water can be discharged smoothly.
► Application
After the chiller works for a period of time, ice will be formed on the fan's air blades, and the antifreeze hairline is used to defrost the water, so that the melted water can be discharged out of the cold storage through the drain pipe.
Since the front part of the drain pipe is installed inside the freezer, it is necessary to install a hairline to ensure that the melted water does not freeze in the drain pipe because the environment below 0°C often causes the melted water to freeze and clog the drain pipe.The heating line is installed in the drain pipe to heat up the pipe while defrosting so that the water can be discharged smoothly.
► Product Features
1.Fully waterproof design
2.Double-layer insulator
3.Molded knots, extremely stretchable
4.Silicone rubber insulator applicable range;-60℃ to +200℃.
► Technical Parameters
Heater
Nickel-chromium or copper-nickel alloy
Length/m
40W/m
50W/m
Heater end
Silicone body sealing end
1
40W
50W
Maximum surface temperature
200°C
1.3
52W
65W
Minimum surface temperature
-60°C
1.5
60W
75W
Water immersion voltage
AC2500V V/min
2.0
80W
100
Voltage
220-230V
Shape
7X5mm²
3.0
120W
150W
Wattage
±5%
Output power
40-50W/m
4.0
160W
200W
Tape Length
±5mm
Insulation resistance
≥200MΩ
5.0
200W
250W
Tolerance
±10%
Leakage current
≤0.2MA
6.0
240W
300W
Note: In general, 50W/m drain heating tape is more commonly used, such as for plastic body drain, the company recommends the use of 40W/m output power pipe heating tape.
Warning: Do not cut the heating cable to shorten the length of the cold tail.
Key words:- Drain Pipe Frost Heating Line
Previous Page
None
Next Page
Product Consulting
Related Products



















































































